Rolls-Royce & Bentley Bonnet / Hood Spring Opening Fix - Arnage, Azure, Brooklands & Seraph models
Enhancing Your Classic's Bonnet Release with Upgraded Springs: A Comprehensive Guide
Welcome to our latest blog post where we walk through an essential aspect of Rolls-Royce & Bentley maintenance: replacing the bonnet springs. Whether you're a seasoned enthusiast or a newcomer to ownership, this guide will give you the steps necessary to upgrade your bonnet release mechanism effectively. This is a guide for Rolls-Royce Park Ward & Silver Seraph and Bentley Arnage T, Arnage R, Arnage RL, Arnage Blue Train, Arnage Diamond, Arnage Red Label, Arnage Final series, Azure & Brooklands models.
Understanding the Issue
The common problem faced by owners of these models is difficulty in popping the bonnet (or hood) open. Often, despite pulling the bonnet release lever, the bonnet stubbornly refuses to budge. This issue can be frustrating and, if not addressed properly, may lead to the risk of damaging the paintwork while attempting to force the bonnet open.
The Solution: Upgraded Bonnet Springs
The key to resolving this issue lies in simply upgrading the bonnet springs. These upgraded springs provide the necessary initial pop to assist in releasing the bonnet, making the process smoother and more efficient. By installing these springs, you can say goodbye to the hassle of wedging objects between the bonnet and wing or risking damage to your vehicle's exterior.
Step-by-Step Replacement Guide
Now, let's walk through the process of replacing the bonnet springs:
- Locate and Remove the Old Springs: Begin by identifying the existing bonnet springs, typically located near the bonnet release mechanism. Carefully remove the old springs, taking note of their positioning for reference.
- Prepare for Installation: Before installing the new springs, ensure that the lock nuts are in the correct position. This ensures proper alignment and functionality once the springs are in place.
- Install the New Springs: Position the new bonnet springs over the studs, then proceed to wind them in using the provided slot. Take care to maintain alignment and avoid over-tightening.
- Secure the Lock Nuts: Once the new springs are in place, secure the lock nuts to prevent any movement or loosening during operation.
- Test the Bonnet Release: Close the bonnet and test the release mechanism to ensure that the bonnet pops up smoothly and without any resistance.
Additional Considerations
These springs can also be installed in the boot lid hinge to improve the initial opening of the boot lid, providing added convenience and ease of access.
Summary
By following this tutorial and watching the video guide, you can effectively upgrade your bonnet release mechanism with upgraded springs. If you have any questions or require further assistance, please don't hesitate to reach out, or suggest our next video tutorial!
Thank you for reading, and happy motoring!
5 April 2024
